Conductivity Electrodes
Electron Microscopy Sciences Z-Axis Electrically Conductive Tape 9703, 1/2" wide 36 YD
3M Electrically Conductive Adhesive Transfer Tape 9703 is a pressure sensitive adhesive (PSA) transfer tape with anisotropic electrical conductivity. The PSA matrix is filled with conductive particles which allow interconnection between substrates through the adhesive thickness (the "Z-axis") but are spaced far enough apart for the product to be electrically insulating in the plane of the adhesive. The PSA tack properties and lack of any thermal curing make tape 9703 easy to use in all applications requiring a conductive tape.
Width: ½"
Hach Company Radiometer Analytical CDC641T Conductivity Cell with Temperature Sensor (2-pole Pt sensor, k = 0.85 cm-1, glass body)
The Radiometer CDC641T is a 2-pole conductivity cell with platinized, platinum sensor (k = 0.85 cm-1), glass body and integrated temperature sensor. The CDC641T sensor's 2 platinum plate design is ideal for routine conductivity measurements or for continuous measurement in various aqueous and non-aqueous media. Additionally, the CDC641T meets requirements of EP 2.2.38. The cell has a fixed cable with MAB6 plug for use with Radiometer Analytical CDM210/230/92 conductivity meters. Please reference article no. E61M022 for a version of the CDC641T with RJ45 plug, compatible for use with Hach sensION+ benchtop conductivity meters.
Cole-Parmer C527-2-1-10T Conductivity Cell; K=1.0, SS, Swage; 100 Ohm Pt RTD ATC
These 10-foot cables with stripped ends are economical replacements for a variety of controllers. There are flow-through, in-line, swage, and dip styles available.
Cole-Parmer C621-2-1-1 Conductivity Cell; K=1.0, SS, In-Line; 100 Ohm Pt RTD ATC
These 10-foot cables with stripped ends are economical replacements for a variety of controllers. There are flow-through, in-line, swage, and dip styles available.
Cole-Parmer C621-3-1-1 Conductivity Cell; K=0.1, SS, In-Line; 100 Ohm Pt RTD ATC
These 10-foot cables with stripped ends are economical replacements for a variety of controllers. There are flow-through, in-line, swage, and dip styles available.
Cole-Parmer Conductivity Cell; K=0.01, SS, In-Line; 100 Ohm Pt RTD ATC
These 10-foot cables with stripped ends are economical replacements for a variety of controllers. There are flow-through, in-line, swage, and dip styles available.
Hach Company Sension+ 5070 laboratory platinum conductivity cell for general applications
Sension+ 5070 is a three-pole platinum conductivity cell with a glass body and built-in temperature sensor. The 5070 has a fixed 1 meter cable and telephonic connector dedicated for use with Hach Sension+ Laboratory Conductivity meters. The 5070 is ideal for conductivity measurements in general aqueous applications.
Cole-Parmer Conductivity Cell, K=0.1, 10 Kohm ATC, stainless steel body
These 10-foot cables with stripped ends are economical replacements for a variety of controllers. There are flow-through, in-line, swage, and dip styles available.
Cole-Parmer Conductivity Cell, K=10.0, 10 Kohm ATC, PVDF body
These 10-foot cables with stripped ends are economical replacements for a variety of controllers. There are flow-through, in-line, swage, and dip styles available.
Hach Company Radiometer Analytical CDC741T Conductivity Cell with Temperature Sensor (2-pole Pt sensor, k = 1.0 cm-1, glass body)
The Radiometer CDC741T is a 2-pole conductivity cell with platinized, platinum sensor (k = 1.0 cm-1), glass body and integrated temperature sensor. The CDC741T sensor's 2 platinum plate design is ideal for use with a sample changer due to easy rinsing. The cell has a fixed cable with MAB6 plug for use with Radiometer Analytical CDM210/230/92 conductivity meters. Please reference article no. E61M023 for a version of the CDC741T with RJ45 plug, compatible for use with Hach sensION+ benchtop conductivity meters.